Відео

Dear Sir, you just saved me a couple of hundred dollars. Thank you so very much for this video. Even though I have a totally different wall heater, your instructions were perfect. I appreciate people like you who take the time to help single women in the high rocky mountains resolve another issue. :o)

Where this at exactly

That's a new way to get arrested

Hi Wayne. I saw your video about propane valves. I have an off-grid home that uses propane from a 400lb propane tank for a stove, dryer, bbq, and most recently a furnace. It seems the furnace does not get enough gas to stay on when the furnace kicks on while using the BBQ or stove. I was thinking of adding a y brass adapter to the tank and attaching two 2-stage pressure regulators at each end and attaching the furnace gas to one and the rest of the home to the other, but I'm not sure this is the best solution. Do you have any insights as to what is the best solution? Any help or guidance is apprecaited. Thank you!

Thanks

Done everything step by step & it’s still shutting off on me..heater not even old 🤦🏾‍♂️

i blow mine out and i also use a vaccume cleaner and go over the ceramic plates

Thank you for the information!! It worked for us.

😢😢😢RIP HEROS 😢😢😢😢THANKS FOR YOUR SERVICE ☝️ ☝️ ☝️ 😖😖😖🫣🫣🫣😪😪😪🐾🐾🐾🐾🐾🐾🐾🐾🐾🙏🙏🙏🙏🙏🙏🙏🕯🕯🕯🕯🕯🕯💔💔💔💔💔💔☝️🕊🕊🕊🕊🕊🕊🕊🫣🫣🫣🌈🌈🌈🌈

Man I just wanted to take a minute to thank you fot making this video. I had never taken my heater down to bare bones to clean it until I watched your video. I have the same heater as you do but a blue flame version. I had a so-called hvac pro come in several years ago to clean my heater and make sure everything looked good. He took the grate only off and wire brushed over the burner. Charged around $50 lit it and said that is all you have to do. I cleaned it yesterday, lit it and the pilot light flamed up yellow-orange color and when I turned it up it stayed lit for a few minutes and went out. Freaked me and my wife out. After watching your video, I took it apart and followed your steps and heater is working as it should! Can't thank you enough! Appreciate you bud! Liked and subscribed to your channel.

Absolute best video presentation about how to fix my heater. Thank you so much! Please add more tags in description and title because I like to have never found this video, and you explained everything so well that I was able to fix it myself 😅. Btw I know this video is 7 years old, so I hope you are doing well.

Thanks Jeff from @BobbleheadHomestead for bringing me here.

Thanks a lot of good information

You don't blow between them heater rocks you can blow the felt right out

Miss you Wayne. Wish you still made some videos!

Watching in November 2023 . Still a vary good video with good information and clear instructions . In Canada these heaters are NOT LEGAL ... YET you can get Mr. Buddy and a Mr. Buddy CABINET heater ( basically a Mr. Buddy BIG in a metal 3 sided cabinet that takes a 20 Lb Propane tank . Kind of Big Brother stupidity Eh ? This cleaning advice is applicable to these smaller heaters as well . Thanks . Ontario Canada.

I have about a dozen of these and I wouldn't own anything else. Take care of the reel and clean everything up periodically...... unless you step on it, it should last forever.

Super simple, loved it. Subbed.👍👍

Would you recommend a ventless wall heater in my chicken coop in the winter to keep my cocks warm?

Good instructions, I clean pretty much the same, except in the opposite order presented in the video. And use the vacuum while blowing with much less forceful air pressure.

So sick of these things not being reliable every time I try to light the pilot each winter. I smell the gas coming out when I try to light it. The ignitor button works fine. But pilot will not catch. Right now, instructions tell me to remove 4 screws and pull front panel forward. OK, I did that but that doesn't make the burner injector any easier to reach or clean. No one in my area services these things, so its either hoping cleaning will fix it or it's another $350 out of pocket for a new one.

If comments are turned off ( OPD valve video) it automatically gets a thumbs down whether the video is good or not.

Awesome got to get this done this weekend

Impressive and super helpful! Thanks!

Thank you so much, I am a service tech for a small propane company in Iowa. Have a customer that said she sees a flame shooting over the brick and sometimes out of the heater... I couldn't see it. It is only an 18,000 but heater with three bricks and the outer two bricks light but the middle one doesn't glow like the outer ones. I am going to try to clean it as you did, thanks again.

I use stale, hard marshmallows covered in peanut butter

This replaced an older wall unit that failed. ua-cam.com/users/postUgkxQDiHf0Cagl2e3YNPX-bWnDMXQAL2A2Y8 The grill on the front is nice, the old unit did not have one, just the glass. Much more kid/dog friendly. Best feature is the battery operated igniter..... old one had the plunger type, which was quirky. This one fires right up with just a touch of the button. Takes the chill off a room very quickly, seems to put out more heat that the one that was there, even though they were the same BTUs. Very impressed.... so much so I bought a second one to replace the other old one even though it still works!

A good video, but why is my heater making my showings turn different colors or is it my environment? Thanks.

Awesome stuff. Just got 3 problem squirrels with a 120

What if you run out of propone can

its great wayne, i just purchased a F250 that is propane powered.

Do you eat the squirrel ? Why do you trap them? Seriously.

How do I get one of those gauges

What happens when you run out

How mach

Is it terrible that I knew where you were traveling? :}

My 16-year old propane heater had gotten to where the flames were leaping off the burners like the one wonky burner in your video. I've routinely cleaned the pilot light assembly over the years, but I had never cleaned the primary air holes for each of the burners. I used my air compressor to blow up through the air intake holes and poof--a black cloud literally puffed in my face! After cleaning everything up and putting it back together, no more leaping flames, and the burners are glowing nice and red, just like it did when it was new. Thanks so much for the detailed video.

Great video--thank you! But my wife would kill me if I cleaned that shield over the couch! LOL

Excellent post! No B.S. or trying to be a star, just good solid info. Saved me from an expensive visit from the furnace man who would have sneered at my ignorance. I might add that a computer keyboard duster worked just fine.

Wane, thanks for the video. My 30.000 btu heater is only 4 weeks old and ran great until a few day ago. When the burner try's to light it seems like it has to much gas and bellows blue flame above the ceramic tiles. The heater then shuts its self off. PLESE advise. Thanks,

Excellent information your presentation was concise. I now know why my pilot light is yellow. Here is a question for you, or a comment viewer. My control knob will not turn from the "pilot light" position to low, med, high, without jiggling the knob until if releases and moves. It took many attempts to move it the last time I used it.

Will a dirty burner cause my mr heater 30,000 btu to backfire, and blow big flames out ? It's a brand new heater, I've only had it about 4 months. But who knows how long it sat in a warehouse or store ?

Very good tutorial help me a lot but the issue I have is the thermocouple gets a soot on it I scrape it off and it comes right back is my propane dirty is there a filter I can put in line thanks for any help God bless you

I hope your still active Wayne. I'm from Ireland ☘️🇮🇪. And love your Wayne's country living 🇺🇲

I noticed that after cleaning, the flame was still flickering orange on the pilot (which is what mine is doing). Is this normal or is it something to worry about? I have blown air through mine but it continue to flicker orange. I don't recall it doing this before. Thanks!

Thank you! Now I know how to maintain my heater!

Thank you for this video. You helped me fix the problem with my wall furnace.

Great video

Brother this is a really good video thanks

This was such a life saver. Thank you!